1060L Drying Oven, 30°C -300°C Item ID: MEMUF1060
Universal Oven UF1060
Precise drying, heating, ageing, burn-in and hardening in research, science, industry and quality assurance.
Temperature
| Set temperature range in °C | min.10 above ambient up to +300 |
|---|---|
| Temperature | 1 Pt100 sensor DIN class A in 4-wire-circuit |
Control technology
| Language setting | German, English, Spanish, French, Polish, Czech, Hungarian |
|---|---|
| ControlCOCKPIT | adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-colour display |
| Timer | Digital backwards counter with target time setting, adjustable from 1 minute to 99 days |
| Function SetpointWAIT | the process time does not start until the set temperature is reached |
| Calibration | three freely selectable temperature values |
| adjustable parameters | temperature (Celsius or Fahrenheit), fan speed, air flap position, programme time, time zones, summertime/wintertime |
Ventilation
| Fan | forced air circulation by 2 quiet air turbines, adjustable in 10 % steps |
|---|---|
| Fresh air admixture | adjustment of pre-heated fresh air admixture by air flap control in 10 % steps |
| Vent | vent connection with restrictor flap |
Communication
| Documentation | programme stored in case of power failure |
|---|---|
| Programming | AtmoCONTROL software for reading out, managing and organising the data logger via Ethernet interface (temporary trial version can be downloaded). USB stick with AtmoCONTROL software available as accessory (on demand). |
Safety
| Temperature control | adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperature |
|---|---|
| Autodiagnostic system | for fault analysis |
Standard equipment
| Works calibration certificate | Calibration at +160°C |
|---|---|
| Door | fully insulated stainless steel doors with 2-point locking (compression door lock) |
| Internals | 1 stainless steel grid |
Stainless steel interior
| Interior | easy-to-clean interior,made of stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides |
|---|---|
| Volume | 1060 l |
| Dimensions W x H x D in mm | w(A) x h(B) x d(C): 1040 x 1200 x 850 mm |
| Max. number of grids/shelves | 14 |
| Max. loading of chamber | 300 kg |
| Max. loading per grid/shelf | 60 kg |
Textured stainless steel casing
| Installation | on lockable castors |
|---|---|
| Dimensions | w(D) x h(E) x d(F): 1224 x 1726 x 1035 mm |
| Housing | rear zinc-plated steel |
Electrical data
| Voltage Electrical load | 400 V, 3 phases, 50 Hz approx. 7000 W |
|---|
Packing/shipping data
| the appliances must be transported upright | |
|---|---|
| Customs tariff number | 8419 8998 |
| Country of origin | Federal Republic of Germany |
| WEEE-Reg.-No. | DE 66812464 |
| Dimensions approx incl. carton | B x H x T: 1370 x 1970 x 1300 mm |
| Net weight | approx. 252 kg |
| Gross weight carton | approx. 416 kg |