The LAB 500 Series of compact under-bench glassware washers delivers exceptional cleaning performance for small to medium-sized laboratories, especially where space is limited. These next-generation washers incorporate the same advanced washing technology found in high-throughput systems, offering outstanding flexibility, superior cleaning results, and efficient drying. Each model supports injection washing and drying on up to two independent levels.
An advanced electronic temperature control system, equipped with two independent probes, ensures consistent operation at 93°C (199°F), optimizing both performance and cycle duration. Select models feature a HEPA 14-filtered forced air-drying system, ensuring thorough drying of both the interior and exterior of glassware. For added convenience and safety, ergonomic telescopic bearing rails allow for smooth, secure loading and unloading.
The washing chamber and spray arms, as well as tank filters, are made of high quality AISI 316 L stainless steel (DIN 1.4404). The washing chamber has rounded edges in order to avoid any dirt traps, minimising the risk of microbial growth. The external cabinet is made of AISI 304 stainless steel (DIN 1.4301). Water filtering system on three levels captures residue preventing re-circulation and extending the pump life.
Different models of 300mm wide side cabinets allow holding:
Stands improve ergonomics when the machine is not installed under the counter. The 600mm / 23.62" heigh stands are equipped with doors for easy storage access to chemicals and accessories. The stand is recommended when the machine is equipped with the option of boiler to preheat DI water and the needed booster pump.
A comprehensive choice of racks and accessories to meet different capacity and cleaning demands, allowing to maximise the numbers of different utensils and glassware that can be washed, preventing movement and damage and ensuring complete coverage of the loads.
The door acts as a loading platform for lower and dual injection wash carts. At the same time, the upper level has fully extendable telescopic bearing rails allowing an easy and safe loading/unloading of the glassware. As standard, the unit is equipped with two rotary spray arms, one on the bottom and one on the top of the chamber. Upper-level racks are also available with a rotating washing arm for washing general purpose items.
Our series of glassware washers and dryers feature a bult in HEPA 14 filtered forced air-drying system ensuring the complete internal and external drying of all the glassware. It allows for adjustable time and temperature settings, optimising cycle duration and energy consumption.
Powerful washing pump with high flow rate combined with effective spray pressure, optimizing water flow and pressure.
As standard, the LAB 500 series is equipped with an integrated steam condenser to prevent vapors from entering into the washing area at a set temperature – programmable from 0°C to 93°C (32°F – 200°F).
Two standard peristaltic pumps provide precise addition of liquid chemical agents. An additional dosing pump to meet specific wash requirements is available up on request.
RS 232 Port for printer connection to monitor and validate washing cycle. A USB port for historical cycle data and machine parameters is available on LAB 500 SCL / CL / DRS models.
This configuration is available in two models:
Stainless steel door
LCD display, 40 programs;
RS 232 port for printer or PC connection;
USB port for cycle data storage and program updating.
Full glass door
Full glass soft touch panel, 40 programs;
RS 232 port for printer or PC connection;
USB port for cycle data storage and program updating.
With forced hot air dying system on two independent levels, available in two models:
Stainless steel door
LCD display, 40 programs;
RS 232 port for printer or PC connection;
USB port for cycle data storage and program updating.
Full glass door
Full glass soft touch panel, 40 programs.
RS 232 port for printer or PC connection.
USB port for cycle data storage and program updating.
With forced hot air dying system on two independent levels and a 300 mm width lateral cabinet door for chemical storage, direct access to drying filtering system and direct access to chemical dosing system. Available in two models:
Stainless steel door
LCD display, 40 programs.
RS 232 port for printer or PC connection;
USB port for cycle data storage and program updating.
Full glass door
Full glass soft touch panel, 40 programs.
RS 232 port for printer or PC connection.
USB port for cycle data storage and program updating.
Steelco Laboratory glassware washers comply with the current European directives and standards as follow: 2006/42/EC, 2014/35/EU, 2014/30/EU and 2011/65/EU Directives, EN 61010-1, EN 61010-2-040, EN 61326-1, EN ISO 15883-1 current standards.
Overall Dimensions WxDxH: 600 x 630 x 850 mm
Chamber Volume: 171 litres
Basket Volume: 151 litres
Overall Dimensions WxDxH: 900 x 630 x 850 mm
Chamber Volume: 171 litres
Basket Volume: 151 litres